+ Built-in data hold function: This function allows you to easily hold and read measured values even after disconnecting the measurement leads. This ensures accurate and reliable measurements.+ Non-contact voltage detection: The NCV function allows you to detect the presence of voltage at a safe distance, without making direct contact with the cables.+ REL function: The initial value at the start of the measurement is stored as the reference value (= zero). The difference between the subsequent readings and the reference value is shown on the display.+ Min/Max function: The meter records and then displays the minimum and maximum values.+ Automatic and manual range setting.- Backlight: A large backlit display ensures good readability even in poor lighting conditions. Specifications
| Product basic info |
|---|
| Primary colours | Red |
| Additional colours | Grey |
| Depth unit | 60 mm |
| Height unit | 200 mm |
| Width unit | 92 mm |
| Weight unit | 320 g |
| Material | ABS |
| Physical properties |
|---|
| Cable length | 1 m |
| Display height | 32 mm |
| Display width | 56 mm |
| Display type | LCD |
| Backlight | |
| Maximum digits display | 4000 |
| Electrical data |
|---|
| AC current | basic accuracy:±(1.5%+5) |
| AC voltage | basic accuracy:±(0.8%+5) |
| Audible continuity measurement | |
| Automatic polarity indication | |
| Capacity | basic accuracy:±(4.0%+15) |
| DC current | basic accuracy:±(0.8%+5) |
| DC voltage | basic accuracy: ±(0.5%+5)
|
| Diode test | |
| Frequency | basic accuracy:±(0.5%+2) |
| Fuse type | F 0.50 A / 1000 V, 6,35 x 32 mm, F 10 A / 1000 V, 6.35 x 32 mm |
| Continuity test | |
| Out of range indication | |
| Transistor test | |
| True rms | |
| AC current measurements | 0.1 µA - 10 A |
| AC voltage measurements | 0.01 mV - 750 V |
| Capacity measurements | 10 pF - 100 mF |
| DC current measurements | 0.1 µA - 10 A |
| DC voltage measurements | 0.01 mv - 1000 V |
| Frequency measurements | 10 Hz - 10 MHz |
| Resistance measurements | 0.1 Ohm - 40 MOhm |
| Resistance specifications | basic accuracy:±(0.8%+5) |
| Technical data |
|---|
| Safety rating | Cat III / 1000 V |
| Automatic power-off function | |
| Data-hold function | |
| Relative value measurement | |
| Remote voltage test | |
| Environmental data |
|---|
| IP rating | IPx0 |
| Usage location | Indoor only |
| Operational properties |
|---|
| Range setting | Automatic |
| Power supply |
|---|
| Batteries included | |
| Number of batteries | 1 |
| Low battery indicator | |
| Battery composition | Alkaline |
| Battery IEC size | 9 V |
| Included |
|---|
| with LED light | |
| Set contents | - silicone sleeve
- pouch
- TLM80:Test lead set - CAT III 1000 V / CAT IV 600V - length 100 cm
|
¡Aún no hay comentarios de usuarios!
